Re: what have you done to your truck lately?

by **no_luck** on Thu Oct 08, 2009 1:23 pm

i like the touch with the wood.

by **LowFuk** on Thu Oct 08, 2009 3:45 pm

Guido what comps are those. I just got one just like them but there is no name and the sicker has been pealed off.

by **bdpaco** on Thu Oct 08, 2009 4:20 pm

those look like ViAir 480's to me

by **Guido** on Thu Oct 08, 2009 7:05 pm

yes sir you are correct Paco
and thanks Kyle. I was a little iffy at first to do it, but figured wtf lets try it out

by **redfordranger04** on Thu Oct 08, 2009 10:18 pm

Car is looking good Guido. Like the wood in the trunk

by **Guido** on Fri Oct 09, 2009 1:29 am

thanks man

by **Cipherex** on Mon Nov 16, 2009 11:36 am

just finished my frame... 17ft.

by **djs03xtreme** on Mon Nov 16, 2009 9:33 pm

well went out side looked at it and aired it up today.. let it started for about 15 mins... then walked back inside...

by **ProfessorKaos** on Mon Nov 16, 2009 10:05 pm

put my new vents in

by **1low_blazer_x** on Mon Dec 28, 2009 3:37 pm

New parking lights and vent shades on the blazer....commin to realize im missing a headlight clip....how do you lose those????

by **xxxxcjxxxx** on Mon Dec 28, 2009 5:08 pm

I moved the F150 over 2 ft so my uncle could get some stuff past it... bout to yank the seats to get redone n gotta start the glass work on the console n buy the new TV I want in it.. and so on so forth.. hopefully the house fairy visits with something I want to buy! so i can have the truck at home in the winter to work on.

by **GCash** on Tue Dec 29, 2009 12:45 am

Pulled the dash out, fixed the water leak coming from the cowl panel down into the interior so no more lakes in my passenger floor boad, and made a plate to go over the the hole for the door to let the air move over the heater core from the blower motor. no more draft coming in, my hot rod heater works awesome now without all the air coming through the cowl. it may see more road time in the winter now.

by **GCash** on Tue Dec 29, 2009 12:45 am

oh, and clay bar'd and waxed it too

by **meanface** on Thu Dec 31, 2009 4:00 am

took the blazer body back off and pulled the motor out so i can put the 2wd front clip on

by **madkaw** on Thu Dec 31, 2009 11:25 pm

GBD Kyle had my seat bolted down, so i got to sit in it Wink