New Bracketry

Just got alot of new items cut today.
3'' Nissan gusset

3'' Ford gusset

New frame tabs



And heres an item im rather proud of. This baby welds to a crossmember you have on the ground and locates all 4 front 4 link mounts. The beauty behind this bracket is its designed to work with my axle tabs to space all the pivot points equally and its modular insert adds considerable strength to the top mounting locations. Simply tack weld the inserts countersunk legs into the tab holes and grind smooth for a seamless look. That keeps your 4 link working properly and saves you time setting everything up. The bracket keeps the bottom bushing 1/4'' off the ground, feature a flatspot 1/4'' from the edge of the tubing so you can wrap your weld around the end. Its made of 1/4'' pickled&oiled steel. P&O steel makes for a cleaner cut edge and has virtually no millscale cutting down on your metal prep time. It also features a full shoulder surrounding the polyurethane bushing just ike all my tabs. Other tabs dont cover the entire bushing and that could lead to the tab cutting into the bushing or causing premature wear. Hell it just looks better too!

All that and theyre STILL cheaper than similar bracketry found on other sites.

Showin some dually love with these 4'' axle tabs.


I also got my diamond shear load plates in today

A couple of new items today!
First is an 8pc mazda specific notch kit. These notches mate up to the mazda framerails perfectly and allow you to lay frame on a 255/35/20.

Second is a universal 8pc octagnal notch kit. For those of you who want a little more shape than the boring standard notch kits.

Both are lazer cut from 3/16'' P&O mild steel and are in stock now. Ill have them available at my booth this weekend at Slamily Reunion.
http://guiltybydesign.net/?category=Bracketry&subcategory=Notches

I just got my keychains in!

http://guiltybydesign.net/?category=Swag

3 new gussets today.





http://guiltybydesign.net/?category=Bracketry&subcategory=Gussets

I also got these bad boys in


http://guiltybydesign.net/?category=Swag

Customers gussets

Had to run nitrogen through the lazer to keep it cool enough to get this intricate but we got it done.

New axle mount.

With this you can mount your upper 4-link bars to the lower bag bracket. Simply weld the top 4 countersunk tabs to the bag plate and grind smooth. Works with 2500 or 2600 lb bags and available for 2.75'' and 3'' axles.

Balljoint plates for a customer. 1/4'' and 1/2'' mild steel.

Save space by locating your link bars directly under your bags using these mounts. Its modular design fits together perfectly and all you have to do is spot weld the 4 locating tabs.

*Fits 2 3/4'' Axle and uses 2 1/2'' wide bushing
*Made from 1/4'' P&O steel
*Sold in pairs
[SIZE="4"]$30[/SIZE]

This side filler panel makes skinning your trailer fenders a breeze.
*Lazer cut from 16ga mild steel.
*Fits standard 9''x 32'' single wheel fenders.
*Sold Individualy



http://guiltybydesign.net/?category=Sheetmetal&subcategory=Fenders

98+ 2WD Ford Ranger Tranny Crossmembers are in. These are lazer cut out of 1/4'' P&O steel and .125'' wall tubing. They use all 3 stock mounting holes and clear the ground without dragging or high centering the truck.


$149.99
http://guiltybydesign.net/?category=Crossmembers

PM'ed ya about key chains.

Newness!


These trick tubular bag mounts can be used in the front of your ride to replace the standard tortion mounts or in the rear on a bridge or lever setup.
*Made from 1/4'' p&o steel and 1 1/2" .125 wall tubing
*Fits 2500 and 2600 series bags
*Sold Individually

http://guiltybydesign.net/?category=Bracketry&subcategory=Bridge+Plates

Had a request for these and figured id add them to the lineup.


For those who are building their own 6 link. These tabs are perfect for welding a 2''dia polyurethane bar end into to pivot from.
* 1/4'' thick p&o steel
* Fits 2'' O.D bar end
* Available for 2 3/4'', 3'', and 4'' Axles
* Sold in sets of 4



Gas door filler panel for your 85-93 Mazda B Series. Hand formed by yours truly to fit the flare of the 4wd bed.

New axle tab to the lineup


2'' Frame tab

This frame tab locates your pivot point directly ontop of a 2'' rail but could also be mounted a number of different ways. Perfect for 3x2 rails or 2x2 link bars.


And lastly tie down hooks

Perfect for locating your own tie down locations on your frame. Can be welded virtually anywhere.

More newness to make life easier.

These S10 bodymounts are an excellent alternative to using stock mounts or spending forever making your own. Theyre lazer cut from 1/4'' P&O steel, press formed, and feature the distinct hole pattern for s10 bushings. They have a big enough shoulder to be used either right side up or upside down.

http://guiltybydesign.net/?category=Bracketry&subcategory=Frame+Mounts

I had a request for a pair of under axle bag mounts that also incorperated the lower link bar mounts so i now carry them as well.

http://guiltybydesign.net/?category=Bracketry&subcategory=Axle+Brackets

New Mitsubishi gusset

http://guiltybydesign.net/?category=Bracketry&subcategory=Gussets

And im starting a line of keychains featuring various trucks. As of now i only have 88-98 FSC, 98+ Ranger, and 89-94 Toyotas but ill soon have many more. Dont forget if you want a custom keychain hit me up kyle@guiltybydesign.net


http://guiltybydesign.net/?category=Swag&subcategory=Keychains